Ironwoker/ punching and shearing machine/hydraulic Ironworker
A hydraulic Ironworker can be used for punching, shearing, notching, bending and other metal fabricating functions.
Features:
Sinomec's universal multi function Ironworker machine for production purposes with maximum efficiency and minimum deformation. The Q35Y-12 (40 ton) pressure machines are in the SINOMEC's tradition of well-engineered, robust steelworkers built for long working life.
The universal machines are supplied with standard tooling include repetition support table at punching, shearing and notching stations and with easily adjust hold down at five stations to safely and control the operations, comprehensive safety guards are fitted as standard on all working stations.
Free standing on suitable floor, the ironworker machines just require electrical connection to be ready for work. For two operator utilization, the hydraulic system is activated by two shielded for switch control, one operating the punching end cylinder, the other operating shearing end cylinder, the shear cylinder provides the power to three shearing stations and notching station.
The system gives precision accurate power inching at all give five works stations and allows the ironworker machine to be stop at any position giving safe and accurate tool setting and working positioning. Limit switches at both ends of the machine control stroke length at all stations.
Centralized lubrication is meter by one Shot system, being only one feature of the low maintenance requirement.
Machine includes 1 movable magnetic base low volts halogen light, 1meter long touch and cut rule length stop back gauge. Fine adjustment facility to punch stroke and measuring scale in the notching table.
After-Sale Service
1. Two year warranty is provided.
2. Customers can send photos or samples for our confirmation once the parts are damaged within the two year warranty. If the parts are not damaged by misoperation, we will reply to customers within 48 hours and provide free parts for replacement. Besides, for the parts out of commission and beyond the warranty, we only charge for the basic costs of parts.
3. We regularly follow up the service condition of products, and timely analyze and copy with the feedbacks. As for the disputes, we will figure out effective actions to reach mutual satisfaction.
| Descriptions |
Model |
|
| 1.Machine Technical Data |
Single Hydraulic Steel Worker Machine |
Q35Y-12 |
| Rated Capacity in pressure Force |
400 KN |
| Metal Tensile Strength |
≤450 N/mm2 |
| Stroke Ram length |
32 mm |
| Stroke Speed – 16 mm Travel |
23 min |
| 2.Punching Station |
Deep Throat Standard |
175 mm |
| Punching maximum capacity , |
20*10 mm |
| Material x Diameter x Thickness |
| Punching maximum capacity, |
38*6 mm |
| Material Diameter x Thickness |
| Punching Largest hole (Optional) |
57 mm |
| Working height |
940 mm |
| 3.Flat Plate Cutting Station |
Flat Plate Shearing Maximum |
200*10 mm |
| Width x Thickness |
| Flat Plate Shearing Maximum |
350*6 mm |
| Width x Thickness |
| Angle Flange Trim Maximum 45° |
80*10 mm |
| Working height |
940 mm |
| 4.Angle Cutting Station |
90° Miter (True Interior /Exterior ) |
80*8 mm |
| 45° Miter (True Interior /Exterior ) |
50*6 mm |
| Working Height |
1140 mm |
| 5.Section Cutting Station |
Round Bars Maximum Diameter |
30 mm |
| Square Bars Maximum Diameter |
25 mm |
| Channel C or U /I or H Beams( Optional )cust |
76*38 mm |
| Tee ( Optional ) |
38*6 mm |
| Working height |
1140 mm |
Audited Supplier 
){kind=link}